Aston Martin One-77 Clutch Rebuild – AY93-7C545-AA

Aston Martin One-77 Clutch Rebuild

GTE Engineering rebuilds customer-supplied Aston Martin One-77 clutch assemblies using PEGA Clutch® friction linings. Reference AY93-7C545-AA identifies the application. This is a send-in rebuild service; inspection determines the condition of the supplied assembly and any additional work required.

What the Rebuild Includes

Work outside the selected rebuild scope is quoted for approval. Discuss the required assembly and any additional balancing service before shipping.

Available PEGA Clutch Stages

Only the selectable options on this listing are offered. A general stage chart may show the wider PEGA range. Discuss road or track use and modifications when selecting the lining specification. No torque capacity or service-life guarantee is implied.

Application and Part Identification

For the Aston Martin One-77 clutch application identified by AY93-7C545-AA. Supplier catalogues identify this as a twin-plate clutch and flywheel assembly with 215 mm outer diameter. This listing rebuilds the agreed components of your supplied clutch; it does not supply a new complete OEM assembly.

Part selection responsibility: GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.

Gallery and Service Examples

The gallery shows shared Aston Martin clutch and flywheel service examples with inspection marks. These are not verified One-77-specific assembly photographs. The separate flywheel photograph illustrates separately selected flywheel work. No part-specific identity is assigned to these shared images. Original identification photographs remain available where edited images cannot reproduce small markings exactly.

How the Send-In Service Works

1. Verify your part. You or your installer must establish the correct assembly, part reference and transmission before placing the order.
2. Select the stage and arrange shipping. Use the service quote form for scope, pressure-plate requirements, timing or shipping questions. Follow the shipping instructions and include your order information.
3. Inspection and rebuilding. GTE identifies additional work requiring approval, rebuilds the agreed components and completes the assembly checks.
4. Professional installation. Your installer completes fitting, adjustment and the applicable clutch calibration.

Core shipping address: GTE Engineering – Attn: PEGA Clutch, 67 Park Street, Orange, NJ 07050, USA. Confirm receiving arrangements before shipment.

Common Questions

Is a new clutch or flywheel supplied?

This listing rebuilds your supplied clutch. A replacement pressure plate, flywheel work or other additional parts are included only when specified in your selection or written estimate.

Will this repair every shifting fault?

The rebuild addresses the submitted clutch assembly. Hydraulic faults, actuator problems, installation issues and calibration requirements need separate diagnosis.

What warranty applies?

See Warranty and Rebuild Coverage for the applicable craftsmanship coverage, installation requirements, conditions and exclusions.

Technical Resources and Service Support

PEGA Clutch rebuilding and performance stages · F1 and E-Gear clutch installation guide · All rebuild and product guides

Request a service quote · Shipping instructions